Using a Crane Man Basket? Here are the Top Safety Tips
Workplace safety is incredibly important, particularly in unpredictable or hazardous environments. If you’re an employer, then it’s your responsibility to make sure that your staff are following the correct safety rules for the workplace.
The use of a crane man basket is ideal for the inspection or repair of large structures, and transporting people or tools to use at height, or far below ground. However, before a man basket can be used in the workplace, it’s important that your staff are all adequately trained from the get-go. Here are the top safety tips that everybody should be aware of before using a crane man cage:
Make Sure that it’s Certified
Before a crane man basket can be used, it’s crucial that it has been certified as per OSHA/ASME regulations. These regulations are essentially a list of official guidelines that must be met to ensure that the crane and equipment is secure, stable, and able to adequately support a load.
IMT Truck Bodies offer OSHA-compliant man baskets which can provide you with up to 35’ of working height, and include a fall arrest harness and radio remote lanyard to ensure the safety of your employees. Not only are these man baskets safe, but they’re also incredibly easy to use, and you will feel at ease knowing that they have come from a trustworthy site.
Perform Routine Tests
Each time you use your crane basket, it’s mandatory that you test the equipment with your supplied test weight before a lift can be performed. If there’s any problems, it’s much better to find out about them when a weight is on the crane, and not a human.
You should also inspect the crane controls, rigging lines and any other devices which can be linked to safety before an employee enters the basket.
Use the Necessary Safety Gear
The worker in the basket should be wearing any necessary PPE required for the job, including hard hats, protective gloves, safety glasses, fluorescent jackets, a harness and a lanyard. This allows your employee to be best protected from falling materials and avoid eye irritants that could cause a temporary vision issue.
Each job comes with different hazards, so you should always determine what PPE is required for each different project.
Be Sure That Everyone is Aware of Their Role
When working with a crane, it’s not just the employee in the basket who needs to be giving the job their full attention. It’s important that the crane driver is sufficiently trained and licensed, and you should have a trained ground standby person monitoring the crane at all times in order to guide the travel and the operation.
Communication is key, and all three members of staff should be in constant contact as the work goes ahead. This can be done through walkie-talkies, hand signals or other methods of contact. If, for whatever reason, communication is not able to take place, then the job should be temporarily put on hold until the problem is fixed.